Gallery
Real jobs, planned in Velmar Cut
Sheets for laser, plasma and the panel saw, remnants and skeletons, and bar plans with mitred cuts. Every picture is a plan Velmar Cut made, with the figures it gave.
7 days, every edition unlocked · Windows 10 and 11 · no account Linux and macOS: coming soon
-
2D · Laser
The alphabet A to Z, 234 letters on one sheet
Sign letters in four sizes, from 300 mm down to 60 mm, nine sets in all, with the counters kept as holes. Thirteen small letters are cut inside the counters of bigger ones.
- Pieces
- 234
- Yield
- 67.5%
- Stock
- 1 sheet 3000 × 1500
- Level
- Balanced
- Cutting length
- 144.2 m
- Parts in holes
- 13
- Gap / margin
- 3 mm / 10 mm
- Material
- Stainless steel 1.4301, 2 mm
-
2D · Laser
Conveyor drive parts, 233 on one sheet
Involute spur gears from m6 z60 down to m3 z30, 16B and 12B chain sprockets, bearing flanges and plates, tensioner and torque arms, slotted motor plates, spacer rings, chain guides and washers.
- Pieces
- 233
- Yield
- 59.9%
- Stock
- 1 sheet 3000 × 1500
- Level
- Balanced
- Cutting length
- 186.2 m
- Gap / margin
- 6 mm / 10 mm
- Material
- S355, 10 mm
-
2D · Plasma
Connection plates for a steel frame
Column base plates with anchor slots and a grout hole, haunch plates with a concave edge, bracing gussets, ring flanges for CHS 219 columns, end, fin, splice and cap plates, stiffeners and lifting lugs, for plasma cutting. The square anchor washers are cut inside the ring flanges' bores. The picture shows the first sheet, at 79.2 %; the second is at 61.2 %.
- Pieces
- 142
- Yield
- 70.2%
- Stock
- 2 sheets 3000 × 1500
- Level
- Balanced
- Cutting length
- 160.3 m
- Parts in holes
- 10
- Gap / margin
- 10 mm / 15 mm
- Material
- S355, 20 mm
-
2D · Laser
Farm machine parts with 1400 mm side plates
Frame side plates with an axle notch, obround lightening holes and bolt rows, triangular hitch plates, clevis lugs, curved tine brackets, mudguard stays, scraper blades, link plates, spring brackets, U-bolt plates and gussets. Eight clevis lugs are cut inside the side plates' lightening holes.
- Pieces
- 104
- Yield
- 71.9%
- Stock
- 1 sheet 3000 × 1500
- Level
- Balanced
- Cutting length
- 105.0 m
- Parts in holes
- 8
- Gap / margin
- 5 mm / 10 mm
- Material
- S355MC, 6 mm
-
2D · Laser
Stainless guards for a food machine
Guard panels with bending reliefs and a window, perforated guards with 270 holes each, hopper sides, conveyor side guides, access doors with keyholes and a handle slot, gland plates and brackets. Fourteen gland plates and brackets are cut inside the windows of the panels and doors, and a 2975.9 × 198 mm strip along one long edge stays as a reusable remnant.
- Pieces
- 36
- Yield
- 71.0%
- Stock
- 1 sheet 3000 × 1500
- Level
- Balanced
- Cutting length
- 82.3 m
- Parts in holes
- 14
- Gap / margin
- 3 mm / 10 mm
- Material
- Stainless steel 1.4301, 1.5 mm
-
2D · Laser
160 laser parts on one sheet
Sprockets, flanges, ring segments, lugs and brackets of fifteen kinds on one 2500 × 1250 sheet, with small parts inside the openings of larger ones.
- Pieces
- 160
- Yield
- 63.5%
- Stock
- 1 sheet
- Cutting length
- 115.7 m
- Material
- S355, 8 mm
-
2D · Laser
Duct flanges, ring inside ring
Round duct flanges from 125 to 630 mm nested ring inside ring, and rectangular duct frames frame inside frame, on one galvanized sheet. The yield is low because rings are mostly opening; the sheet itself is full.
- Pieces
- 30
- Yield
- 35.0%
- Stock
- 1 sheet
- Cutting length
- 79.2 m
- Material
- Galvanized steel DX51D Z275, 3 mm
-
2D · Laser
Sign letters in aluminium
Letters cut from a font, their counters kept as holes, nested upright on one sheet.
- Pieces
- 34
- Yield
- 42.7%
- Stock
- 1 sheet
- Cutting length
- 33.6 m
- Material
- Aluminium AlMg3, 3 mm
-
2D · Laser
Five sets of VELMAR on one sheet
Thirty 300 mm sign letters, five sets of the word VELMAR, interlocked on one aluminium sheet. A and R keep their counters as holes, and a 550.4 × 1230 strip is left for later.
- Pieces
- 30
- Yield
- 54.9%
- Stock
- 1 sheet
- Cutting length
- 48.1 m
- Material
- Aluminium AlMg3, 3 mm
-
2D · Laser
A VELMAR sign with letters cut inside it
A 2415 × 470 sign face with its 350 mm letters cut out, the two counters of its A and R, and five sets of 60 mm VELMAR letters. The small letters and the counters are cut inside the face's M and R openings, so the rest of the sheet stays one 2418 × 757 remnant. The yield is low because the face is mostly opening.
- Pieces
- 33
- Yield
- 23.5%
- Stock
- 1 sheet
- Cutting length
- 26.7 m
- Material
- Aluminium AlMg3, 3 mm
-
2D · Plasma
Five sets of VELMAR on yesterday's skeleton
Thirty 200 mm letters in 10 mm steel for plasma cutting, placed on a skeleton remnant around its old holes and notches.
- Pieces
- 30
- Yield
- 48.2%
- Stock
- 1 remnant
- Cutting length
- 32.1 m
- Material
- S235, 10 mm
-
2D · Laser
Control cabinet panels
The flat panels of a control cabinet with its door window, louvres, cable openings and bending reliefs, plus its mounting rails, cable duct lids and wall brackets.
- Pieces
- 24
- Yield
- 77.5%
- Stock
- 3 sheets
- Cutting length
- 72.6 m
- Material
- Steel sheet DC01, 1.5 mm
-
2D · Plasma
Parts on three remnants
Brackets, gussets, lugs and plates placed on three remnants, around their holes and notches.
- Pieces
- 130
- Yield
- 67.4%
- Stock
- 3 remnants
- Cutting length
- 92.4 m
- Material
- S235, 10 mm
-
2D
Yesterday's skeleton, used again
Plates and frames lie with their openings over the skeleton's old holes, so every part fits.
- Pieces
- 22
- Yield
- 59.9%
- Stock
- 1 remnant
- Cutting length
- 24.8 m
- Material
- S235, 3 mm
-
2D · Laser
Plates edge to edge, shared cuts
Plates, gussets and haunch plates packed with no gap, so neighbours share one cut.
- Pieces
- 79
- Yield
- 88.4%
- Stock
- 1 sheet
- Cutting length
- 71.1 m
- Shared cuts
- 29.5 m (41%)
- Material
- S235, 6 mm
-
2D · Plasma
Base plates for a steel frame
Column base plates, end plates, stiffeners and gussets on two 15 mm sheets for plasma cutting.
- Pieces
- 84
- Yield
- 77.4%
- Stock
- 2 sheets
- Cutting length
- 83.5 m
- Shared cuts
- 22.9 m (27%)
- Material
- S235, 15 mm
-
2D · Panel saw
Kitchen cabinet panels on a panel saw
Oak plywood panels for a run of kitchen cabinets, in straight cuts only, with the grain kept along each panel.
- Pieces
- 61
- Yield
- 88.9%
- Stock
- 3 sheets
- Cutting length
- 107.2 m
- Material
- Oak plywood, 18 mm
-
1D
Stair and landing balustrade
Mitred rails and posts in square tube, cut at the stair's pitch and paired so their angled ends share a cut.
- Pieces
- 48
- Yield
- 90.0%
- Stock
- 14 bars, 2 of them remnants
- Material
- Square tube SHS 40×40×3
-
1D
Mezzanine frame in HEA and IPE
Columns, beams, joists and 45° knee braces on 6 m bars.
- Pieces
- 36
- Yield
- 90.1%
- Stock
- 13 bars, 1 of them a remnant
- Material
- HEA 160 and IPE 200
-
1D
Roof trusses in angles
Chords and diagonals cut at 30° and 60°, placed so their angled ends share their cuts.
- Pieces
- 66
- Yield
- 92.3%
- Stock
- 23 bars
- Material
- Angles 60×60×6 and 50×50×5
-
1D
Sliding gate and fence
Round tube frames mitred at 45°, flat bar pickets with a 60° top, angle frames and brackets.
- Pieces
- 81
- Yield
- 89.7%
- Stock
- 24 bars, 1 of them a remnant
- Material
- Tube Ø48.3×2.6, flat bar 40×8, angle 50×50×5
-
1D
Aluminium windows with 45° mitres
Frames and sashes for twelve aluminium windows in three sizes, every piece mitred 45° at both ends, on 6.5 m bars.
- Pieces
- 96
- Yield
- 93.3%
- Stock
- 17 bars
- Material
- Al frame profile 70 and Al sash profile 78
-
1D
Purlins and girts for a steel hall
Purlins and girts in cold-formed C sections on 12 m bars, with four remnant bars from the rack used first.
- Pieces
- 58
- Yield
- 96.2%
- Stock
- 25 bars, 4 of them remnants
- Material
- Cold-formed C 200×70×2.5
-
1D
Stainless handrails for a stair
Rails and knee rails cut to the stair's pitch, mitred corners, posts and returns for a stair and its landings, on 6 m bars.
- Pieces
- 56
- Yield
- 87.4%
- Stock
- 17 bars
- Material
- Tube Ø42.4×2 and Ø33.7×2, 1.4301
In the pictures of the Velmar Cut 1.7 works, job and part names are in the page's language; in the other works they are the jobs' own data and stay in English. Click a plan to see it large. In the app shows it in Velmar Cut's window and Plan in 3D in Velmar Cut's 3D view; on the 1D works, Cut sequence shows a bar with its cut lines and the cut list. Close-up, on the 1.7 jobs that cut parts inside openings, shows those parts, and Part in 3D, on most works, shows one part at the thickness of its sheet or profile.
Free trial
Seven days with every edition
Install Velmar Cut, enter the parts and stock of a current job and print the cutting schedule. The trial starts on first run and needs no account or card.